Usage of bathtub: 1. Plug the plug at the outlet first; 2. Discharge water, the water level should be below 42cm, and adjust the water temperature; 3. According to personal needs, put in some skin care bath products; 4. After soaking, drain the bathtub water directly, wash the inner wall of the bathtub with a shower, and then dry it.
The details are as follows:
1. Plug the plug of the water outlet and drain the water. You can also wipe the inner wall of the bathtub clean first, or you can directly pour it with hot water. The hot water can play a role in cleaning and sterilization.
2. Next, plug the water outlet, adjust the water temperature, and control the water volume within a reasonable range. For example, the water level should be below 42cm. If it exceeds the human heart, it may cause the heart to beat too fast due to the high water temperature, which may cause discomfort.
3. After the water is put away, according to personal needs, put in some skin care bath products. The bath time should not be too long, or the high temperature may lead to dizziness.
4. When the bath is over, the water in the bathtub will be drained directly. Use the shower to wash the inner wall of the bathtub. There is no water inside, so it can be dried naturally.